Venga VG RVC 3002 Manual De Instrucciones página 20

Note: The dust collector frames should be air-dried after washing and should not be
exposed to direct sunlight. Do not wash the HEPA filter with water. If the primary filter and
HEPA filter are damaged, replace them in time to avoid damage to the internal motor of
the robot.
C. Cleaning the mop
Remove the mop from the water tank, wash the mop with water and let it dry.
D. Maintenance of the central and side brushes
•
Remove the central brush's cover by gently pressing the two locks, take out the brush,
clean the compartment and the vacuuming channel with a damp cloth.
•
Clean the rolling brush. If any hair, threads or yarn
got stuck, cut them with the help of the cleaning
tool.
•
Remove the side brushes, use a damp cloth to clean the dust.
Make sure you correctly place them back with their
corresponding letter ("L" or "R").
VG RVC 3002 20