Publicidad
Idiomas disponibles
Idiomas disponibles
EN
16
INSTALLATION
General information
•
The pump is suitable for fountains or small ponds. The solar panel supplies
the pump with the necessary operating voltage and charges the battery.
•
Light sunlight and even cloudy skies are sufficient (in daylight) to operate
the pump.
•
The LED lights automatically illuminate the fountain in the dark.
Assembly
•
Attach the plastic bolt to the underside of the frame of the solar panel.
•
Connect the solar panel to the control box.
•
Position the pump under water so that it is completely covered. Use the
four flexible suction cups to attach the pump to the pond/well bottom.
If the water is far too deep for the pump to reach the surface, elevate its
standing position by placing stones or similar suitable material under it.
•
Select the desired nozzle for the well and plug it onto the well pipe, as well
as the well pipe onto the pump.
•
Connect all parts as shown in the illustration.
Publicidad
