Tribit STORMBOX BLAST BTS52 Manual De Usuario página 8

EN
7. Stereo Mode
Speaker A
>5S
① ②
① Please make sure that the two speakers are turned on.
② Long press the Bluetooth button of the speaker A for 5s to enter
the Stereo Mode pairing ( Note: this speaker will be regarded as
the main speaker );
③ Short press the Bluetooth button of the speaker B to enter
the pairing mode ( Note: this speaker will be regarded as a
secondary speaker );
④ When you hear the prompt sound "stereo mode", the pairing is
successful and the speaker A & speaker B enter the Stereo Mode.
At this time, the main speaker will broadcast "left channel" and
the secondary speaker will broadcast "right channel".
Warm Tip: For Stereo Mode, you need to have two Tribit
StormBox Blast speakers.
9
StormBox Blast
Speaker B
>1S
① ③
8. Reset
Volume -
●
If the speaker has abnormal conditions, you can try to reset the
Blast ( Note: long press the ''volume +''and ''volume -'' buttons
at the same time for 5 seconds ). After resetting, the historical
pairing information will be cleared, and you need to re-pair the
Blast with the device before use.
EN
Volume +
>5S
10