Philips Viva Collection HR2370 Manual Del Usuario página 22

5
After the Pasta maker finishes kneading, it will beep a few times and the pasta
extrusion will start after a few seconds. Place a container right under the outlet.
Cut the pasta into the desired length with the cleaning tool.
Note:
• If the ratio of liquid and flour is not correct, the
extrusion will not succeed. In this case, prepare the
ingredients again.
• Move the cleaning tool downwards to cut the pasta.
6
When the extrusion process is complete, the appliance will beep a few times.
Note:
• Do not turn the control knob to the "OFF" position before the whole process is
over (you will hear the "beep" sound).
7
After the pasta making is complete, if you notice some leftover dough inside the
chamber, you can turn the control knob to the OFF position first, and then turn
the control knob to the extra-extrusion position. Press the Start/Pause button to
start the extra-extrusion program.
Note:
• You may find some fine pasta threads on the pasta
surface. This is normal.
• The cooking time of the pasta varies depending on
personal preferences, pasta shapes, and number of
servings.
22 English
OFF
2 1
3