Flashing The Bios - VIA P4M800 Pro Guia De Inicio Rapido

Do NOT flash the system BIOS unless it is really necessary.
Updating and flashing the BIOS content risks BIOS data corruption which may
cause system unable to power-on.
Download the xxxxx.EXE file corresponding to your model from our website to an empty directory
on your hard disk or floppy. Run the downloaded xxxxx.EXE file and it will self extract. Copy these
extracted files to a bootable floppy disk.
Note: The floppy disk should contain NO device drivers or other programs.
1. Type "A:\AWDFLASH and press <Enter> Key.
2. You will see the following setup screen.
3. Please key in the xxxxx.bin BIOS file name.
XXXX
5. Key in File Name to save previous BIOS to
file.
XXXX
XXXXX
xxxxx.bin
xxxxx.bin
7. The BIOS update is finished.
XXXX
XXXXX
xxxxx.bin
F1 : Reset F10 : Exit
14

6. Flashing the BIOS

4. If you want to save the previous BIOS data
to the diskette, please key in [Y], otherwise
please key in [N].
XXXX
6. To confirm and proceed, please key in [Y]
to start the programming.
XXXX
8. Keep this BIOS floppy disk for future use.
XXXXX
xxxxx.bin
X X X X X
xxxxx.bin
xxxxx.bin