Harbor Breeze PL125BK Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
8. Locate two small posts on underside of fixture
cover (B). Insert one post into non-slotted hole
on top edge of fixture (A) first and then the
other post into slotted hole on top edge of
fixture (A).
Locate tab on fixture cover (B). Pull tab out and
bring fixture cover (B) down to fixture (A),
making sure that tab snaps over edge of fixture
(A). Pull up on fixture cover (B) to make sure
the tab is locked over top edge of the fixture
(A).
CAUTION: Failure to test that the fixture
cover (B) is secure may result in the fixture
cover (B) coming loose or coming off.
9. Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the following page.
10. After completing installation, caulk fixture (A)
mounting surface with silicone weather sealant
(not included).
WARNING:
mounting surface with silicone weather sealant
may result in water damage in outlet box, which
may cause electrical malfunction or electrical
shock.
Failure to caulk fixture
8
B
Post
Non-slotted
Hole
A
6 9
6 10
8
Tab
Slotted
Hole
A
A
Post