Publicidad
Idiomas disponibles
Idiomas disponibles
Receive call
Operation
Press the call
LED.
Description
When a call is incoming, the call LED will pulse green. Press the call LED to receive the call and the call LED will
turn green during the call.
Note
Not support APP network platform phone call.
Operation
Press and hold the call
LED for 2 seconds.
Description
When a call is incoming the call LED will pulse green. Press and hold the call LED for 2 seconds to reject the call
and the call LED will turn off.
Note
Not support APP network platform phone call.
Operation
Press the call
LED.
Description
During a call the call LED will be green. Pressing the call LED will end the call and the call LED will turn off.
Note
Not support APP network platform phone call.
Redial last number
Operation
Double-click the call
LED.
Description
While connected via Bluetooth, double-click the call LED to redial the last number called. You will hear a voice
prompt "Redialing" and the call LED will turn green.
Note
Only supported when connected via Bluetooth.
Activate Voice Assistant
Operation
Press and hold the call
LED.
Description
When connected via Bluetooth to a device that supports voice assistant, press and hold the call LED for 2
seconds to enable and begin speaking. Press and hold the call LED again for 2 seconds to deactivate the voice
assistant.
Note
Not supported on all devices.
Reject call
End call
6
Operation
Press the Mic LED.
Description
Press the Mic LED to mute. Mic LED will turn red while muted.
Operation
Press the Mic LED.
Description
Press the Mic LED to un-mute. Mic LED will be red while muted and turn green when un-muted.
Operation
Press the - LED or the + LED.
Description
To increase the volume press the + LED and press the - LED to decrease the volume.
Pause and Play music
Operation
Press the power button.
Description
While using a music app, press the power button once to play or pause music.
Reset to factory settings
Operation
Press and hold Call LED and Volume + LED for 5 seconds when Bluetooth is disconnected and power is ON.
Description
To reset the speakerphone to original factory settings, press and hold the call LED and volume + LED for 5
seconds while Bluetooth is disconnected, and the speakerphone is powered on. The voice prompt "reset
completed" will confirm success, the speakerphone will automatically enter Bluetooth pairing mode, and you
will hear the voice prompt "ready to pair".
Power and battery status
Operation
Insert the USB-C cable into the USB-C port.
Description
When the battery is charged above 70% the LED near the power button will be white. When the battery is
charged between 25% and 70% the LED near the power button will flash white once every 30 seconds. When
the battery is charged less than 25% the LED near the power button will be red. When charging, the LED near
the power button will be pulsing white.
Mute
Un-mute
Volume
7
Publicidad
