Eleglide Tankroll Manual De Usuario página 9

EN
Step 3 Install The Front Light and Front Mudguard
A) Loosen the screws on the fork crown and take them out.
B) Place the front light and front mudguard in the right position.
C) Slide the screws through the front light, front mudguard and front fork, and then tighten them.
D) Secure the front mudguard. (There are 2 screws on the fork blades for securing the mudguard.)
E) Connect the light cable with the bike cable.
Step 4 Install The Display
A) Open the 2 support rings of the display by loosening the screws on them.
B) Put the support rings through the handlebar.
C) Close the rings to secure the display. (Make sure the display is in the middle of the handlebar.)
D) Open the clip of the display button and buckle it on the handlebar.
E) Connect one of the display cables with the bike cable and another display cable with the button cable.
(Connectors of the same color should be connected together.)
6