Publicidad
Idiomas disponibles
Idiomas disponibles
ROTATION
To set the rotation of the display, select ROTATION, confirm, then select the desired status and confirm
the selection.
To enable the automatic calculation of the optimal spreading angles of the satellites and the
optimal hanging point of the EasyMount+ flying bracket (for truss mounting), the rotation of
the display must correspond to the mounting type.
• Mounting on spacer bar: ROTATION standing
• Truss mounting (180° rotation): ROTATION flying
SETTINGS
To enter the system settings menu, select SETTINGS and confirm the selection. Then select the desired
submenu item and confirm the selection.
SYSTEM STATE DISPLAY OF THE SYSTEM STATUS
PIN LOCK
* * * *
Enter PIN
code to LOCK
BLUETOOTH
OFF
ON
DISPLAY
Brightness
Screensaver
RESET
FACTORY DEFAULT Restore factory settings: Select RESET and confirm.
(the illustrations in the unit menu may vary slightly depending on the software version)
16
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
0.0
ms
4
Sat
Protect the amplifier module from accidental and unauthorised
operation by activating the lock function.
Enter a 4-digit PIN and confirm the entry.
Access can now only be made after entering the PIN.
Reset PIN: Hold down the encoder when switching on.
Bluetooth deactivated.
Bluetooth activated, access to the system via tablet app enabled.
Adjust the display brightness from 10% to 100%.
active
inactive
RESET
ROTATION standing Upright
flying
Deactivation of the display illumination after approx.
1 minute without input via rotary-push encoder.
Display illumination permanently on.
Truss assembly
Publicidad
