Publicidad
Idiomas disponibles
Idiomas disponibles
• Using dowels, place one screw at the
desired position on a wall.
• The screw head can have a diameter
of 7 - 10 mm.
• Leave the screw head protruding at a
distance of approx. 10 mm from the
wall.
• You can place the device onto the
screw using the opening on the bottom
and pull the device down until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Spare Parts/Accessories
Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 30).
Position
Position
instruction
exploded
manual
drawing
2
34-37
10
38
Waste Disposal and En-
vironmental Protection
Be environmentally friendly.
Return the tool, accessories and packag-
ing to a recycling centre when you have
finished with them.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling.
Ask our Service Centre for details.
Defective units returned to us will be
disposed of for free.
www.grizzlytools.shop
Description
Cutter bar
Blade protection
Electrical machines do not belong
in domestic waste.
GB
IE
Order No.
91104913
91104912
27
Publicidad
