Descargar Imprimir esta página

Notes For Use; Attach The Charging Station To The Wall; Charging The Rechargeable Battery; Using The Appliance - Profi Care PC-AKS 3102 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
WARNING: When Mounting the Wall Mount
Make sure beforehand that there are no hidden cables in
the wall that could damage you!

Notes for Use

• The appliance is very suitable for quickly vacuuming
small amounts of dry dirt or dust.
• Dirty filters reduce the suction power of the hoover, so
we recommend regular cleaning of the existing dirt filters.
• The appliance is operated via the charged battery.
Charging is carried out via the power supply unit
supplied, which is connected to the charging station.
Direct mains operation with the power supply unit is not
possible.
Nozzle Attachments
• The various nozzle attachments are easy to attach and
detach.
• Attach the brush attachment to a crevice nozzle.
2-Piece Multifunction Stand
• If you want to set up the multifunction stand, connect the
charging station and the accessory holder to each other
at the plug connection.
• You can place the appliance and the accessories in it.
• If you connect the power supply unit to the connection
socket, the multifunction stand also serves as a charging
station.
• If you prefer to use the charging station as a wall mount,
disconnect it from the accessory mount again.

Attach the Charging Station to the Wall

Mount the charging station near a power socket.
1. Measure the distance between the two slotted holes of
the mount and drill two holes in the wall at this distance.
2. Insert the plugs into the wall.
3. Turn the screws into the plugs with a screwdriver so that
they protrude approx. 3 – 4 mm.
4. Hang the wall mount on the screws.

Charging the Rechargeable Battery

1. Switch off the appliance.
2. Place the appliance in the charging station.
3. Connect the power supply unit to the connection
socket (8).
4. Connect the power supply unit to an approved power
outlet. Charge the appliance for 4.5 hours before using it
for the first time.
- During the charging process, the LED on the switch
flashes red.
- When the battery is fully charged, the LED on the
switch lights up blue continuously.
10
PC-AKS3102_IM
- The LED goes out when you disconnect the mains
plug from the socket or when you remove the appli-
ance from the charging station.
- It is normal for the appliance to heat up during
charging.
5. Stop all further charging after 4.5 hours at the latest or
when the LED lights up solid blue.
CAUTION:
Always disconnect the mains plug from the socket after
charging.

Using the Appliance

On / off Switch with Multifunction LED
Function
Switch
Press 1 ×
Switch on
briefly
appliance
Press
and hold
longer
Press 1 ×
Switch off
briefly
appliance
The LED on the switch flashes for approx. 30 seconds
during operation when the end of the rechargeable battery
capacity is reached. The appliance then switches off. Re-
charge the rechargeable battery.
Operating
1. Remove the appliance from the charging station.
2. Attach a nozzle. You can also attach the brush attach-
ment to one of the two crevice nozzles (12 / 13).
3. Switch on the appliance with the switch.
4. If you want to vacuum at the higher power level, keep the
switch pressed for approx. 3 seconds during operation.
5. Observe the MAX marking on the dust container. The
maximum capacity is 100 ml.
End of Operation
1. Switch off the appliance.
2. Empty the dust container. Clean the filter unit after each
use to restore the appliance to full performance the next
time you use it.
3. Then place the appliance in the charging station.

Maintenance

Emptying the Dust Container
1. If necessary, detach the crevice nozzle from the appli-
ance.
2. Hold the appliance with the opening flap over a dustbin.
LED
Meaning
Lights
Power level 1
green
Lights
Power level 2
blue
Is off
29.12.21

Publicidad

Solución de problemas

loading