Other Connections - Lenco LED-2463BK Manual De Instrucciones

Other Connections

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Connector Type
Component
COMPONENT
Video
Connection
(back)
HDMI
Connection
(back&side)
VGA
Connection
(back)
VGA/
Component
AUDIO IN
Audio
Connection
(back)
SPDIF
SPDIF
(Coaxial Out)
Connection
(back)
Composite
COMPOSITE
(Audio/Video)
Connection
(back)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
12V DC
Connection
(back)
Cables
VGA to Component Connection Cable
Audio Cable
Component/VGA
Audio Video Cable
DC 12V Input
English - 5 -
To enable VGA/Component audio,
Device
you will need to use the back
audio inputs with a VGA/Com-
ponent audio cable for audio
c o n n e c t i o n . When using the
wall mounting kit (contact your
dealer to purchase one, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. Insert or remove
the CI module only when the TV
is SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
The USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency radia-
tion and trouble-free transmission
of high definition signals, such as
4K content, you have to use a high
speed shielded (high grade) HDMI
cable with ferrites.