Resumen de contenidos para Systembuild Evolution 7533196COM
Página 1
7533196COM 2 Door 1 Drawer Storage Cabinet B347533196COM03GO Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first.
Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Página 4
Board Identification Not actual size LEFT SIDE PANEL RIGHT SIDE PANEL TOP APRON WOOD BLOCK T7533196010GO T7533196020GO T7533196030GO T7533196040GO T7533196050GO QTY: 1 PC QTY: 1 PC QTY: 1 PC QTY: 1 PC QTY: 1 PC RIGHT DRAWER SIDE FIXED SHELF LOWER APRON ADJUSTABLE SHELF DRAWER FRONT...
Página 5
Board Identification Not actual size systembuild.com Tube...
Hardware Bag Reference number: 27533196COM2GO Part List Actual Size M4 x 19mm Ø15 x 10mm M8 x 20mm Ø3 x 15mm Ø8 x 30mm Ø3.5 x 12mm ×30 ×30 ×29 ×6 ×22 ×4 CAM LOCK SCREW SCREW CAM BOLT WOOD DOWEL BOLT TGO2100 TGO1007...
Página 7
STEP 1 ×4 ×7 ×5 1.1 Screw (2) into (A) as illustrated. 1.2 Attach (D) & (E) to (A) with (3) & (9) as illustrated. 1.3 Insert (3) into (V) as illustrated. systembuild.com Tube...
Página 8
STEP 2 ×6 ×4 ×2 2.1 Insert (3) into (F) as illustrated. 2.2 Attach (16) to (E) & (F) with (6) as illustrated. systembuild.com Tube...
Página 9
STEP 3 ×8 ×12 ×6 3.1 Screw (2) into (O) & (P) as illustrated. 3.2 Attach (18) to (O) & (P) with (11) as illustrated. systembuild.com Tube...
Página 10
STEP 4 ×16 ×16 4.1 Screw (2) into (B), (C) & (G) as illustrated. 4.2 Insert (3) into (B), (C), (R) & (S) as illustrated. G x 2 systembuild.com Tube...
Página 11
STEP 5 Quick Assembly LOCK ×12 ×6 Proper orientation of CAM LOCK 5.1 Attach (O) to (B) with (1) as illustrated. 5.2 Attach (P) to (C) with (1) as illustrated. 5.3 Attach (G) to (F) & (R) with (1) as illustrated. systembuild.com Tube...
Página 12
STEP 6 ×8 ×4 ×4 ×1 ×1 22-2 23-2 6.1 Attach (N) to (B) & (C) with (14) & (15) as illustrated. 6.2 Attach (22-2) & (23-2) to (N) with (5) as illustrated. 22-2 23-2 systembuild.com Tube...
Página 13
STEP 7 Quick Assembly LOCK ×16 ×4 Proper orientation of CAM LOCK 7.1 Attach (F), (R), (S) & (V) to (B) & (C) with (1) as illustrated. 7.2 Attach (A) to sub-assembly B/C/F/V from previous step with (1) as illustrated. FINISHED EDGE systembuild.com Tube...
Página 14
STEP 8 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. ×30 8.1 Attach (U) to sub-assembly A/B/C/F from previous step with (8) as illustrated. Assure that the unit is square. Distance from corner to corner must be equal as shown.
Página 15
STEP 9 Quick Assembly LOCK ×2 ×2 Proper orientation of CAM LOCK ×4 ×2 9.1 Insert (21) into (J) & (K) as illustrated. 9.2 Screw (2) into (I) as illustrated. 9.3 Attach (T) to (I) with (1) as illustrated. 9.4 Attach (J) & (K) to (I) with (11) as illustrated. systembuild.com Tube...
Página 16
STEP 10 ×6 ×1 ×1 ×6 22-1 23-1 10.1 Insert (M) into (J), (K) & (I) as illustrated. 10.2 Attach (L) to (J), (K) & (T) with (15) as illustrated. 10.3 Attach (22-1) & (23-1) to (J) & (K) with (5) as illustrated. 22-1 22-1 23-1...
Página 17
STEP 11 ×2 ×8 ×1 11.1 Attach (24) to (I) with (4) as illustrated. 11.2 Insert the shelf supports (20) at the desired level and place the adjustable shelves (H) onto the shelf supports. 11.3 Push the drawer into cabinet as illustrated. Cabinet Slide Drawer Slide systembuild.com...
Página 18
STEP 12 ×4 ×8 ×4 ×2 ×12 12.1 Attach (Q) to sub-assembly A/B/C/F from previous step with (11) as illustrated. 12.2 Attach (7) to (Q) with (5) as illustrated. 12.3 Attach (24) to (Q) with (4) as illustrated. systembuild.com Tube...
Página 19
STEP 13 ×1 ×1 ×1 ×1 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. 13.1 Drill a 3/16" (5mm) diameter hole in the wall. Tap the wall anchor (17) into the hole until it is flush. 13.2 Fasten wall bracket (19) to wall anchor (17) with screw (12).
Página 20
STEP 14 To adjust the vertical heght. Loosen screw "A" and adjust door. Tighten screw "A". To adjust side ways. Loosen screw "B" and adjust door. Tighten screw "B". systembuild.com Tube...
Página 21
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 20 lbs./9.1 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
Página 22
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
Página 23
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
Página 24
Español Tamaño real Este no es el tamaño real (1) Bloqueo de leva (16) Pestillo magnético (2) Perno de leva (17) Anclaje de pared (3) Pasador de madera (18) Bisagra (4) Perno (19) Soporte de pared (5) Tornillo (20) Soporte de balda (6) Tornillo (21) Soporte de cajón (7) Placa de impacto...
Página 25
Español Pagina 12 6.1 Conecte (N) a (B) y (C) con (14) y (15) como se ilustra. 6.2 Conecte (22-2) y (23-2) a (N) con (5) como se ilustra. Página 13 7.1 Conecte (F), (R), (S) y (V) a (B) y (C) con (1) como se ilustra. 7.2 Conecte (A) al subconjunto B / C / F / V del paso anterior con (1) como se ilustra.
Página 26
Español Página 21 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está...
Página 28
Taille actuelle Pas de taille réelle (1) Serrure à came (16) Loquet magnétique (2) Boulon à came (17) Ancrage mural (3) Cheville en bois (18) Charnière (4) Boulon (19) Support mural (5) Vis (20) Support d'étagère (6) Vis (21) Support de tiroir (7) Gâche (22) Glissière en métal (8) Vis...