Before The First Use - Tristar AC-5552 Manual De Usuario

4. Air inlet with air filter
5. Recessed handle
6. Air exhaust
7. Drain opening with sealing plug
8. Remote control
9. Exhaust hose
10. Exhaust hose adaptor
11. Slider
12. Slider adaptor

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the appliance.
• Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum
of 50 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the device. Voltage 220V-240V
50/60Hz)
• When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
INSTALLATION
• The air-conditioner should be installed on a flat and stable
surface. Do not block the air outlet and allow at least 50cm
around the unit.
• Socket wiring should be in accordance with the local electric
safety requirements.
• If the unit has been tipped at more than 45°, allow it to stand
upright for at least 24 hours before turning it on.
• Do not operate in close proximity to curtains or other objects that
may block the air inlet and outlet.
Exhaust Hose Installation
• Attach one the end of the exhaust hose to the exhaust hose
adaptor.
• Attach the slider adaptor to the other end of the exhaust hose.
Instruction manual
EN
7