Function Table - Ibiza Light LED-COB90 Manual De Uso

4.
How To Control The Unit
Press the MENU button (once or several times ) until you get to the desired mode (3-channel DMX, 7-channel
DMX, auto 1 mode, auto 2 mode, manual mode or music-controlled mode) and press enter to confirm your
selection.
Use the UP & DOWN buttons to either set the DMX address (if you have selected one of the DMX modes), or
the speed of the AUTO modes (if you have selected one of the auto modes), or the color (if you have selected
manual mode). Press enter to confirm the setting.

FUNCTION TABLE

d001
A001
FF01
CC01
EE01
dEoo
SoUd
A. Master/Slave operation
In master/slave mode you can link a maximum of 32 units together in a daisy-chain. You must choose one of
the units as a Master and the other units will follow it in synchronous operation.
MASTER unit: in AUTO mode (3-CH dxxx or 7-CH Axxx ) or music-controlled
SLAVE units: L'adresse de départ DMX DOIT être mis sur d001.
B. DMX512 Operation
Signal Connection:
The unit is fitted with 3-pin XLR in- & output sockets.
The pins are assigned as follows:
Pin 1: Ground shield
Pin 2: Data (-) signal
Pin 3: Data (+) signal
DMX512 FUNCTION TABLE
The unit can work in 3-channel or 7-channel mode.
©Copyright LOTRONIC 2014
d512
A512
FF99
CC99
EE99
dEoo
SoUd
3CH Mode
7CH Mode
Auto Mode 1 (RGB Color Gradual Change )
Auto Mode 2 (RGB Color Jump Change)
Manual mode (Program Color Selection)
Demo Mode
Sound Mode
LED-COB90 3