Tenda 5G03 Guía De Instalación Rápida página 6

III. (Optional) Extend your
network
Tips
− Currently, 5G03 can be used as the primary node to network with
devices that support the EASYMESH R2 protocol.
− Please ensure that the new device you want to add has never been
used. If not, reset it first.
1. Power on the router and connect it to the internet properly.
2. Place the new device in an elevated and open position within
3 meters from your router and power it on.
3. Press the MESH button of the router for about 1 to 3 seconds.
The LED indicator blinks fast. Within 2 minutes, press the
MESH/WPS button of the new device for 1 to 3 seconds to
negotiate with this router.
When the
seconds and then lights solid on, the networking is successful
and the new device becomes a secondary node in the
network.
Refer to the following relocation tips to locate the new device
4.
to a proper position:
• Ensure that the distance between any two nodes is within
their coverage range.
• Keep your nodes away from electronics with strong
interference, such as microwave ovens, induction cookers,
and refrigerators.
• Place the nodes in a high position with few obstacles.
LED indicator of the router blinks slowly for 10
- 5 -