Descargar Imprimir esta página

KRHÜNER 80755 Manual De Instrucciones página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

ො Immediately switch off the machine in case of abnormal vibrations or occurrence of
another defect. Carefully inspect the machine and grinding disc before switching the
machine on again.
ො Make sure that sparks do not put people into danger or that they contact highly flam-
mable substances.
ො Make sure that the work piece is sufficiently supported or clamped. Keep your hands
away from the surface to be cut.
ො Always wear safety goggles and hearing protection. If desired or required also use an-
other kind of protection like for example an apron or helmet. Ensure that mounted
wheels and points are fitted in accordance with the manufacturer's instructions.
ො Ensure that blotters are used when they are provided with the bonded abrasive product
and when they are required.
ො If a guard is supplied with the tool never use the tool without such a guard.
ො For tools intended to be fitted with threaded hole wheel, ensure that the thread in the
wheel is long enough to accept the spindle length.
ො Ensure that ventilation openings are kept clear when working in dusty conditions. If it
should become necessary to clear dust, first disconnect the tool from the mains supply
(use non metallic objects) and avoid damaging internal parts.
2. HOW TO USE
CONTENT
1x Angle grinder
1x Side handle
1x Spanner
1x Pair carbon brush
1x Instruction manual
PARTS
1. ON/OFF switch
2. Guard
3. Side handle
4. Grinding disc (NOT INCLUDED)
5. Spindle lock

Publicidad

loading