Noise/Vibration Information; Charging Procedure - Bosch ALB 36 LI Manual Original

Charger
Charging period (battery discharged)
– Battery with 1.3 Ah
– Battery with 2.0 Ah
– Battery with 2.6 Ah
– Battery with 4.0 Ah
Weight according to
EPTA‑Procedure
01:2014
Protection class

Noise/Vibration Information

Noise emission values determined according to EN 50636-2-100.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-100
– Vibration emission value a
h
– Uncertainty K
Assembly
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
Mounting the nozzle (see figure B)
Slide the nozzle (5) onto the motor unit. Take care not to
pinch your fingers during assembly.
Inserting/Removing the Battery (see figure C)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery (6). Ensure the battery is inserted
correctly.
To remove the battery (6) from the machine, press the bat-
tery unlocking button and pull the battery out.
Switching on
Before any work on the garden product itself (e. g.
u
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the On/Off switch.
The machine continues to blow for a few seconds after
u
being switched off. Allow the motor to stop rotating
before switching "on" again.
Do not rapidly switch off and on.
Bosch Power Tools
AL 3620 CV
min 55
min 70
min 95
min 140
kg 0.55
/ II
dB(A)
dB(A)
dB
m/s 2
m/s 2
Charging the Battery
Observe the correct mains voltage! The voltage of the
u
power supply must correspond with the data given on
the nameplate of the battery charger. Battery char-
gers marked with 230 V can also be operated with
220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the product. The battery could become
damaged.

Charging Procedure

The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery
(6) is inserted onto the charger (7).
English | 13
AL 3640 CV AL 36V-20
45
45
95
140
0.55
/ II
3 600 HA0 4..
F 016 L94 481 | (20.05.2022)
−
65
−
125
0.55
/ II
78
90
3.0
<2.5
1.5