Product Description - Chauvet DJ BOB LED H3 Guía De Referencia Rápida

Product Description

The BOB LED H3 is a multi-colored flame simulator that does not produce heat. This LED-powered fixture simulates a
flickering cauldron and can be changed to almost any color. The BOB LED H3 can either stand on included legs or hang
from the included chains.
Overview
Magnetic strips
Silk flame attachment
Silk flame
attachment
Plates x 2
Mounting legs x 3
AC Power
The BOB LED H3 has a fixed power supply that works with an input voltage range of 120 VAC, 60 Hz or 230 VAC, 50 Hz,
depending on the specific model.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
1. Disconnect the product from power.
2. With a Philip's head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. lScrew the fuse holder cap back in place and reconnect power.
Disconnect the product from the power outlet before replacing the fuse.
BOB LED H3 QRG Rev. 1
QUICK REFERENCE GUIDE
Flame base
Attachment loops
Chain
attachment
holes x 3
Hanging chains
EN
2