Nicer Dicer Pegasus In Practical Use; Assembly - Genius Nicer Dicer Pegasus Instrucciones De Uso

4 Nicer Dicer Pegasus in practical use

4.1 Assembly

CAUTION!
Risk of cutting injuries!
The blades are extremely sharp. Always hold parts by the plastic and do not touch the blades with your
hands or other body parts under any circumstances.
Store the product out of the reach of children and animals.
Instruction Manual
To insert or replace a disc, remove the lid from the disc frame. To do
this, open the locking clips and thereby releasing the connection of
the two parts.
Insert the desired cutting or grating disc into the disc frame. Make
sure that the marks (arrowheads) line up accordingly. When doing so
only touch the disc at the plastic pin.
Put the lid back on the disc frame and close the locking clips. The
outer clips of the closures hook onto the edge of the disc frame (see
Fig.). The cover is now securely attached to the disc frame.
Place the lid with the disc frame on the collecting container by
connecting the small tab on the disc frame below the handle to the
notch provided in the collecting container.
If necessary, attach the silicone ring to the bottom of the collecting
container.
GB
13