Publicidad
Idiomas disponibles
Idiomas disponibles
• Cleaning the rotary brush
6. Turn the screw located under the brush to unlock it (see illustration).
7. Open the brush fastening part.
8. Remove the pivoting part of the rotary brush and clean it.
9. Put the rotary brush back.
10. Turn the screw located under the brush to lock it again.
4) PROBLEM-SOLVING
Problem
The engine does not start.
The vacuum power has
decreased.
Impossible to close the
dust bin.
BRANDT FRANCE - Simplified Joint Stock Company with capital of 100,000,000 Euros
89/91 Boulevard Franklin Roosevelt - 92854 Rueil-Malmaison (France)
Possible reason
-Plug
not
plugged
correctly into the socket.
-Damaged plug
-Appliance switched off
-Appliance obstructed
-Filters need to be cleaned
-Dust bin not in place
-Filters are obstructed
-The battery has reached
500 cycles and is weak
Filters not in place
22
Action
-Correctly plug in the plug.
-Verify the plug.
-Switch on the appliance.
-Remove the source of
obstruction.
-Clean the filters.
-Close the dust bin.
-Clean the filters
-Change the battery.
Put the filters back in place
and try again.
Publicidad
