Important Safety Instructions - JBL ON TOUR XTB Manual De Instrucciones

2
jbl on tour Xtb user Guide

important safety instructions

Please Read The fOllOwing PRecaUTiOns befORe Use:
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
•
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizing plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The wide blade, or third prong, is provided for safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles and the point where they exit
from the apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
•
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.
PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC., SERVICE PERSONNEL.
•
Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts. Refer all servicing
to the Harman Consumer Group, Inc., Technical Support Group.
fcc/ic statement and WarninG
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept interference, including interference that may cause undesired operation of the device.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING THE EXCLAMATION
FLASH AND POINT WITHIN
ARROWHEAD CAUTION: TO REDUCE THE RISK THE TRIANGLE IS
WITHIN THE
OF SHOCK, DO NOT REMOVE A WARNING SIGN
TRIANGLE IS A
ALERTING YOU
COVER. NO USER-SERVICEABLE
WARNING SIGN
TO IMPORTANT
ALERTING YOU PARTS INSIDE. REFER SERVIC-
INSTRUCTIONS
TO DANGEROUS
ING TO QUALIFIED SERVICE
ACCOMPANYING
VOLTAGE INSIDE
PERSONNEL.
THE PRODUCT.
THE PRODUCT.
SEE MARKING ON BOTTOM OF PRODUCT
WarninG: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WarninG: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR
SPLASHING, AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, DRINKING
GLASSES AND SO FORTH, SHOULD BE PLACED ON THE APPARATUS.
WarninG: THE APPARATUS MAY BE STATIC-SENSITIVE IN SOME
CIRCUMSTANCES AND MAY HAVE TO BE RESET AFTER SUFFERING AN
ELECTROSTATIC DISCHARGE.
important note for all
electronic products:
BEFORE INSERTING OR UNPLUGGING AUDIO
CABLES FROM THE SOURCE DEVICE'S HEAD-
PHONES OR LINE-LEVEL OUTPUT JACKS, IT IS
GOOD PRACTICE TO TURN OFF THE DEVICE.
THIS WILL PROLONG THE LIFE OF YOUR UNIT,
HELP PROTECT YOUR DEVICE FROM STATIC
ELECTRICITY AND AVOID POTENTIAL DAMAGE.