Publicidad
Bluetooth Pairing
1. Take the earbuds out of the charging case, the earbuds will automatically enter
the Bluetooth pairing mode.
The LED indicator on one earbud will flash white.
2. Select "Soundcore Life A1" on your device's Bluetooth list to connect.
When successfully connected, the LED indicator on earbuds will flash white once
every 5 seconds.
When earbuds are out of the charging case and powered off, to manually enter
•
Bluetooth pairing mode, press and hold the multi-function button on both
earbuds for 3 seconds.
Each time you power on your Soundcore earbuds, they will automatically
•
connect to your last successfully connected device if available within the
Bluetooth range.
Mono mode: When Bluetooth connected, you can use either one of the earbuds
•
only by placing the other one into the charging case.
When powered on and connected, if either one of the earbuds is out of battery
•
and powered off, you can keep using the other one.
When you are on a call, place either one of the earbuds into the charging case,
•
the microphone in the other earbud will be activated.
The right earbud is the primary earbud by default. If you want to change this,
•
remove the right earbud from your ear and place in the charging case, the
microphone in the other earbud will be activated and become the primary
earbud.
03 EN
1
2
Soundcore
Life A1
Soundcore
Life A1
1s
Publicidad
