Publicidad
Idiomas disponibles
Idiomas disponibles
8. Attach head assembly(3) to mounting arms (4)
with bolt (2), washer (5),spring washer(6) and
nut (7).
10. Tight all the screws.
BEFORE USE
WARNING:
Failure to heed these warnings may result in personal injury, property damage and/or death.
•
Study, understand and follow all warnings and instructions before using this stand.
•
Do not exceed rated capacity. Use only on hard, level surfaces capable of sustaining the load.
•
Lock mounting plate-rotating mechanism before applying the load.
•
Be sure engine is centered and secured to mounting plate before applying load to stand. Off center loads
may make the load and handle rotate in either direction when the rotational locking device is released.
•
Release the rotational locking device slowly and carefully.
•
Do not attempt to move the loaded stand across a floor having cracks or other obstacles that could
impede movement.
•
Never work directly under a supported load.
•
Visually inspect stand for damage before use. Check for cracked welds, bent metal and loose, damaged
or missing parts.
•
Use only attachment and adapters supplied and approved by the manufacturer. Do not make any
alterations to this product.
All manuals and user guides at all-guides.com
9. Insert head assembly (3) into the hole of the
main post (10). Line up the hole in the head
assembly (3) and the main post (10), and
assembly them by inserting the head locking
pin (1).
4
Publicidad
