Publicidad
Idiomas disponibles
Idiomas disponibles
está listo para su uso.
Specifications and Technical Data sheet
Model
Rated
Voltage
199228
220-240V
50Hz
Before using this product, please read the instruction manual carefully and check if there are
some damaged components. If you notice any damage, the product cannot be installed.
Retain this information for future reference.
Security Warning： ： ： ：
Do not look directly at lighted floodlight.
Never operate the floodlight with wet hands or if you are staying on wet ground.
Keep the light away from environment with existing danger of explosion,
flammable surfaces and objects. Danger!!!
Keep this product out of reach of children or any unauthorized persons.
Installation and maintenance and repair should be done by a qualified electrician.
Do not mount the unit in the ceiling or on a mast(polo).
Before using the device, make sure that all screws are properly tightened.
Always disconnect the power, unplug before working at.
The minimum distance of the illuminated surface is 0.5m.
Do not use the projector without a properly installed safety glass.
Whenever the glass breaks, it should be replaced immediately.
If the power cable became gray or find any changed of outside, please contact
with seller or professional people to repair.
The grounding screw must be tightened.
Installation
Mount the floodlight housing to the top of the telescoping pole by tighten the center
knob clockwise until secure (Abb.1). Do not over tighten. Place the telescoping pole
into hole (A) and (B). Mount the screw nut at the bottom of telescoping pole by
tightening the
stand and
Cable
Rated
Length
Power
3M
2X20W IP65
IP
Chip and
Rating
Lumination
4400LM
screw. Open the umbrella
tighten the locking nut at
Beam
Angle
°
120
Publicidad
