Publicidad
Idiomas disponibles
Idiomas disponibles
Field meter
MTS 100
[28]
13 V: Selects the 13 V power supply for the LNB in the SAT band.
[29]
Alphanumeric display with back lighting: Indicates the Level, Frequencies, Channel and Program.
[30]
SOUND: Light indicator. Indicates that the user can select the sound subcarrier frequency using the
TUNE/SELECT [13] control.
[31]
FREQ: Light indicator. Indicates that the user can select the tuning frequency using the
TUNE/SELECT [13] control.
[32]
CHAN: Light indicator. Indicates that the user can select the television tuning channel in the TV band
using the TUNE/SELECT [13] control. This indicator cannot be selected in the SAT band.
[33]
PROG: Light indicator. Indicates that the user can select the previously stored program for the tuning
frequencies and the sound subcarrier using the TUNE/SELECT [13] control. Moments later the fre-
quency corresponding to the selected program memory appears.
[34]
SEL: Selects the activation of the TUNE/SELECT [13] control, for the selection of the Program,
Channel, Tuning channel frequency and Sound subcarrier frequency.
[35]
LEV: Selects the display mode of the measurement level in dBµV or in the form of a horizontal bar.
[36]
PROG/STO: A double-action key. Pressing it once allows the user to select the memory location using
the TUNE/SELECT [13] control. Pressing it twice allows the user to record the tuning and the TV
sound subcarrier frequencies.
[37]
SAT/TV: The key to switch from the SAT band to the TV band and vice versa.
[38]
SCREEN: The cathode ray tube of the monitor.
40
41
[40]
Fuse holder: Housing for the mains fuse.
[41]
Mains input for voltages from 95 to 250 V AC / 50-60 Hz.
Figure 3.- Side panel.
User
manual
26
Publicidad
