Miracle-Ear CHARGE fullpower RIC/BTE Manual Del Usuario página 7

Troubleshooting
Miracle-EarCHARGE
™
Troubleshooting Guide
SYMPTOM POSSIBLE CAUSES
Red blinking LED
next to charging Fault occurred
port/post
While charging
On-board battery
hearing aids, no
save mode
LEDs are illuminated
12
fullpower RIC/BTE & custom AV
SOLUTIONS
Remove your
hearing aids from
the charging port/
post, wait until the
LED turns off, then
re-insert. If the red
blinking LED persists,
contact your
Miracle-Ear ®
Care Professional.
To illuminate LEDs,
remove hearing aid
from its charging
port/post for three
seconds, then
re-insert it. LEDs will
remain illuminated
for 10 seconds.
Miracle-EarCHARGE
Troubleshooting Guide
SYMPTOM
Hearing
Hearing aids
whistling in
the charger
Troubleshooting
fullpower RIC/BTE & custom AV
™
POSSIBLE CAUSES SOLUTIONS
Reposition your hearing
aids in the charging
Incorrect hearing aid
ports/posts. Confirm that
orientation
the charging LED begins
to glow.
Your
Miracle-EarCHARGE
fullpower RIC/BTE &
custom AV
battery may be fully
depleted. Apply external
Depleted onboard
power to your premium
battery
charger. If you do not
have the cord, push and
hold the hearing aid's
user control for three
seconds to turn it off.
™
on-board
13