Cart Assembly - Uline H-4607 Instrucciones De Montaje

3. Slide keyboard tray into tray brackets and snap into
place. (See Figure 2)
Figure 2
4. Pull keyboard tray out to ensure it is properly
installed.
5. Tighten 1/2" bolts and locknuts.

CART ASSEMBLY

1. Place bottom shelf upside down on a flat surface
with caster holes facing up. Insert casters into caster
holes and secure with rubber mallet. (See Figure 3)
NOTE: Be sure to install the swivel casters with
brakes on the front side of the cart.
Figure 3
Swivel Caster
wIth Brake
Front
PAGE 2 OF 6
ASSEMBLY CONTINUED
Back
1-800-295-5510
uline.com
2. Turn bottom shelf on its side. (See Figure 4)
Figure 4
3. Slide top shelf over bottom shelf, overlapping the
uprights to desired overall cart height. (See Figure 4)
4. With holes aligned, insert 3/4" bolts. Use Allen wrench
and pliers to fasten with nuts. (See Figure 4)
5. Stand cart up and place non-slip mat on top shelf.
POWER STRIP ASSEMBLY
1. Insert 1⁄" bolts through cord wrap bracket and into
top shelf. (See Figure 5)
2. Secure bolts with wing nuts using Phillips screwdriver.
(See Figure 5)
Figure 5
3. Snap power strip into bracket.
Shelf
0521 IH-4607