Publicidad
Idiomas disponibles
Idiomas disponibles
Buttons description
4. DISPLAY
* Press this button to turn on/off the display. This is far the
convenience of users who are unconformable sleeping with
the backlight on.
5 . iFEEL
* Press this button to set the temperatura display on the
remate contrallar to ambient temperatura and press this
button again to set it to preset temperatura.
6. TIMER
* With the unit ON, press this button to set OFF timer or with
it OFF to set ON timer.
* Press this button once, a "ON(OFF)" will flash. Press ' '..A. " or
·•"to set the number of hours in which the unit will be turnad
ON/OFF, with an interval of 0.5 hour if less than 1 O hours, or
1 hour if longar than 1 O hours , and a range of 0.5-24 hours.
* Press it again to confirm the setting, the "ON (OFF)" will
stop flashing.
* lf the timar button is not pressed longar than 1 O seconds after
the "ON (OFF)" start flashing, the timer setting will be exited.
* lf a timer setting is confirmad, pressing this button again will
cancel it.
Note: When a ON timer is set, all function buttons (except SLEEP,
DISPLAY and iFEEL can't be set ) are valid and when the ON time
set is up, the unit will operate as preset.
1g
7 .
This button has two functions.
a. HEALTH
* Press this button with the unit ON to activate health relatad
functions, such as negativa ion, electrostatic precipitation,
PM2.5 removal, etc, depending on the actual configuration of
each model.
* Press this button again to deactivate the HEALTH function.
b. iCLEAN
* Press this button with the unit OFF, the remate contrallar will
display "CL" and the unit will automatically clean dust off the
evaporator and dry it, to increase the cooling and heating
efficiency.
www.infiniton.es
©@
-------
Publicidad
