Warranty
LIMITED LIFETIME WARRANTY
WHAT IS COVERED
If this product fails due to a defect in materials or workmanship at any time during the first five (5) years of ownership, the manufacturer
will replace it free of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged,
misused, cut or worn. This warranty does not cover use in commercial applications. Use only manufacturer-supplied genuine warranty
repair replacement parts to repair this fan. Use of non-genuine repair parts will void your warranty. The manufacturer disclaims all other
implied or express warranties including all warranties of merchantability and/or fitness for a particular purpose. As some states do not
allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific
legal rights, and you may have other rights that vary from state to state.
WHAT IS NOT COVERED
This warranty is limited to the replacement of defective parts only. Labor charges and/or damage incurred during installation, repair,
replacement as well as incidental and consequential damages connected with the above are excluded. Any damage to this product as
a result of neglect, misuse, accident, improper installation or use other than the purpose SHALL VOID THIS WARRANTY. Shipping costs
for return product as part of a claim on the warranty must be paid for by the customer.
Contact the Customer Service Team at (877) 319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday - Friday.
Product Specifications
Airflow: 140 CFM
120V, 60 Hz
Duct diameter: 6 in.
Sound output: 1.0 Sones
Typical Installation
It is recommended to apply proper
insulation around the fan to minimize heat
loss and gain.
This fan is designed to be installed
using a 6-in. duct. Using a rigid duct is
recommended. Using a flexible duct, cut to
size and/or fully extended is also acceptable.
Ducting has a strong effect on the air flow,
noise and energy use of the fan. Use the
shortest, straightest duct routing possible
for best performance. Avoid installing the
fan with smaller ducts than recommended.
Insulation around the ducts can reduce
energy loss and inhibit mold growth. Fans
installed with existing ducts may not achieve
their rated air flow.
Power consumption: 42 W
Weight: 10.16 lbs
Ceiling Opening Dimension Requirements:
10-13/16 in. (L) x 10-1/2 in. (W) x 8-1/2 in. (H)
Properly insulate
around fan to
minimize building
heat loss and
gain
Fan housing
Seal any gap
around fan
housing
3
Short piece of
flexible duct helps
alignment and
absorbs sound
2-3 foot
straight run
before elbow
Roof cap
(with built-in
damper)
Caulk
termination
to duct
Wall cap
(with
built-in
damper)
Homewerks.com