Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• Lift the fan holder
F
Be careful not to cut yourself with the
small evaporator wings or with the
edges or corners of the adjacent metal
sheets.
Note: clean the area below the evaporator with
hot water. With the aid of a suitable recipient, it
is recommended to slowly pour some hot water
being careful not to spray the surrounding
components. The water must be poured from
the side of the back panel so that as it flows it
moves towards the drainage holes of the tank. If
necessary, repeat the operation several times.
Cleaning honeycomb
At least once a month, it is recommended to
clean the HONEYCOMB.
• Remove the display shelves
• Remove the evaporator covers
• Remove the HONEYCOMB
N°DOC. UM000310 REV. "F" - 18/07/22
SHAPE PRISME
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
• Blow with compressed air to fully clean the
HONEYCOMB
Fig. 33
Front deflector cleaning
• Remove the deflector from the two support
hooks
Fig. 34
15/22
IT
FR
EN
EN
DE
ES
PT
Fig. 35
Fig. 36
Fig. 37