Sony SPP-ID975 Manual De Instrucciones página 27

5
Press (PGM).
"ENTER NUMBER" appears.
6
Enter the phone number.
You can enter up to 32 digits, including a tone
and a pause, each of which is counted as one
digit.
When the phone number of 17 digits or more
has been entered , the phone number appears in
two lines.
7
Press (PGM).
You will hear a long confirmation beep, and the
name and the number are stored. The display
goes off.
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tip
If you have entered a wrong name or number in step 4 or 6, press
(VOLUME)(--) to erase it. Then enter the correct name or number.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 6 above, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (REDIAL/PAUSE).
To change a stored number
Store a new number, as described previously.
SONY
1234567
1234567890123456
12
continued
Telephone Features
27 US