Descargar Imprimir esta página

URBANGLIDE BIKE 140 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

1. ON/OFF
2. The bell
There is a bell located on the handlebars, use it to
warn people around you of your arrival.
3. The battery indicator
4. Loading
The charging port is located in the frame of
the draisienne, as shown in the following
picture.
When the battery is fully charged, the LEDs
on the display turn green.
5. Folding and unfolding
WARNING: This product is not allowed on public roads, please check the legislation in your country.
Instructions for use
As shown in the photo, the button circled in red allows
you to turn your device on and off. Push up to turn on.
Then down to turn off. To turn on the front light, press the
button below the battery indicator for 3 seconds.
The screen located on the right side of your
handlebars allows you to follow the battery level
of your device.
4 bars: Battery at 100%.
3 bars: Battery below 80%.
2 bars: Battery below 50%.
1 bar: Battery below 20%.
To unfold the handlebars of your electric bicycle, lift them up and
secure them with the lock at the base. Before riding, make sure
your handlebars are tight and stable.
To fold your handlebars, loosen the lock at the base of the
handlebars, then lower the handlebars along your product. You
can also unscrew the foot pegs and remove the seat so that your
product takes up as little space as possible.

Publicidad

loading