Additional Safety Rules - HammerSmith 234821 Instrucciones De Uso

to use the device, to operate the device safely and
in accordance with regulations, and have been
adequately informed of all dangers that may arise
from its use.
• Cleaning and user care must not be carried out by
children unless they are older than 8 years of age
and are supervised.
• Maintenance of the device. Make sure that
moving parts are correctly attached, firmly in
place, and free from damage that could impair
the functionality of the device. If the device
is damaged, you must have it repaired by an
authorized dealer.
• Keep the cutting tools clean and fresh. Properly
maintained cutting tools with sharp blades are less
likely to become clogged and are easier to control.
• Use the device and accessories in accordance with
these instructions, taking into account the working
conditions and the task to be performed. Using the
device for work for which it is not intended can lead
to dangerous situations.
• Only ever charge the battery using the charger
provided by the manufacturer.
• A charger designed for a different battery pack can
create a fire hazard if it is used for charging.
• When the battery pack is not in use, keep it away
from other metal objects as these could potentially
short-circuit the poles of the battery. If the poles of
the battery are connected to one another, a fire or
fire may result.
• In the event of improper working and storage
conditions, liquid can escape from the battery.
Avoid this coming into contact with the skin under
all circumstances. If you accidentally come into
contact with the liquid, rinse it off immediately
with water. If the liquid comes into contact with the
eyes, seek medical attention immediately. Liquids
that leak from batteries can cause skin irritation
and burns.
• This device is designed for household and personal
use only.
5. MAINTENANCE
• Do not try to repair the device yourself, and
ensure that repairs are only ever carried out by an
authorized specialist dealer.
• Use only original replacement parts. This
guarantees that the safety of the device is
maintained.
The operation and use are entirely the responsibility
of the user.

ADDITIONAL SAFETY RULES

• Always use protective goggles or glasses.
• Never use the Hammersmith MultiTool if it is wet.
• Wear hearing protection during prolonged use.
• Wear a dust mask when operating in a dusty
environment.
• Before sanding, make sure that any nails, screws
or other metal objects protruding from the
workpiece have been removed.
• Always inspect walls and ceilings before drilling
and screwing to avoid damage to potentially
concealed power cables and pipes.
• Use screw clamps or other suitable clamping
devices to fix the workpiece firmly to the surface
and to prevent it from slipping.
• Only use attachments that are supplied for the
Hammersmith MultiTool.
• Do not use broken, damaged or worn accessories
or attachments. Only use attachments that are in
good working condition.
• Always start the device in a suitable space,
9