Publicidad
Idiomas disponibles
Idiomas disponibles
ACCUMULATOR OPERATION
1. PREPARE TO ACCUMULATE
Each time before accumulate, please make sure the platter is empty, the current accumulator values is
reset to zero, and the weight reading is stable.
2. ACCUMULATION OPERATION
Put the weight item on platter, wait for the weight reading to be stable, enter the price and press the add
key, the window will show "add n" being the number of how many times you press add. Now, press M+
key. Now, remove the first item from the platter, and repeat the previous step. You can carry on this way
for 99 times with the scale.
3. ACCUMULATE CLEAR
You can clear the accumulated value by press C (clear) key at any time.
4. UNIT PRICE STORAGE
The scale can store 8 sets unit price.
5. STORE THE UNIT PRICE
Press store key, then enter desired unit price using numeric keys.
Now press M*(*=1 to 8) key. The value will be stored into respective M*(*=1 to 8) key. If you have already
entered any value in that key, it will be replaced by new value.
6. LOAD THE UNIT PRICE
If you want to use the unit price stored in the scale, while weighing, that press respective M*(*=1 to 8)
key after the weighing display is stable, the unit price will be loaded and it will be displayed in unit price
window.
CAUTION
1. BATTERY
•
The battery must be recharged properly after use of the scale without mains power.
•
Normally; charge for 1, 2 hours for each using 1 hour.
•
If it is not used for longer time, then charge it continuously at least for 24 hours. Otherwise it will
cause damage to battery.
•
Before you begin to charge battery, please turn off the scale firstly.
2. WATER/TEMPERATURE
Protect your scale from heavy raining, water flooding and also from direct sunlight and high temperatures
(above 50degree.) this scale is not a water proof scale.
3. HUMIDITY
Protect it from the constant humidity, do not install near humidifier.
Publicidad
