Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The VFD120 Motor-Driven remote control flow divider is ideally suited for the agricultural and industrial user seeking a
cost effective method of controlling hydraulic motor speed. The priority flow port gives an output independent of load
pressure while the By-Pass port can be used to power a secondary circuit.
Webtec have been designing and manufacturing flow meters and hydraulics components for over 40 years. We operate
within a Quality Management System that complies with the requirements of BS EN ISO 9001 which is externally
audited and certificated each year. Beyond compliance to the standard, Webtec is committed to continually improving
in everything we do; with particular emphasis on understanding what matters to our customers and suppliers, and
designing our systems and work to meet their needs. We are always keen to hear from customer who may have special
requirements not covered by our standard ranges.
Features
Reliability
•
All connections made via M12 connector
•
IP66 certified (with cable connected)
•
Intelligent design – power failure detection, high current detection, broken demand signal detection.
•
No external control box needed. All electronics are self-contained inside the canister.
•
Minimum to maximum priority flow in less than 10 seconds (at full pressure)
•
11 – 28 Vdc supply enables unit to be powered from a vehicle supply
•
Choice of remote control options: Potentiometer, 0.5–5 Vdc, 4–20 mA loop
•
Set and Forget
•
Up to 420 bar (6000 PSI) maximum working pressure.
•
Pressure compensated permitting both 'priority' and 'By-Pass' flow to be used simultaneously at varying pressures
•
without affecting the 'priority' flow rate
Stability of Flow
•
1
Publicidad
