Publicidad
Idiomas disponibles
Idiomas disponibles
Before re-welding be sure to return the knob to the welding position.
Welding: Used for most welding applications. In this mode, the dimming function is on. Select the protection level,
delay time, and appropriate sensitivity level.
Plasma cutting: Used to cut with plasma equipment, the darkening can be adjusted between 5 and 8.
ADJUSTING THE DEGREE OF PROTECTION
In case of having a filter with adjustable DIN, adjust the degree according to the application from which we want to
protect ourselves . See the following table.
HARNESS ADJUSTMENTS
Harness Height (Position W)
Adjust the harness to the appropriate depth for your head to ensure correct and stable balance.
Tighten the harness (Position Y)
Press the adjustment button on the back of the harness and turn it to the right or left to the appropriate position.
Adjust Distance (Z Position)
Adjust the distance between the face and the lens by loosening the two outer nuts equally and press inward to release
it from the adjustment slots.
Angle Adjustment (X Position)
Four bolts on the upper right side of the harness provide an adjustment for future helmet lean. To adjust, loosen the
adjustment knob on the right side, then lift the tab on the control arm and move it to the desired position. Finally,
retighten the adjustment knob.
11
Publicidad
