Maintenance And Storing - Infiniton HS-2067PTC Manual De Instrucciones

Operation:
1. Plug the power cord into a standard 220-240V AC electrical outlet.
2. Press the "ON/OFF" switch on the top, then the heater will be connected to electricity
3. Press the button marked " 1000W" to choose the power, when press one, the power is
1000W, when press down both two switch, the power is 2000W
4. When press down the oscillating button, the heater will turn automatically.
Tip over function
This heater has with tip over switch function, when the heater falls off, then the power will be shut
off automatically.
Overheat Safety Device:
The heater is fitted with a safety device to switch off the heater in the event of overheating.
If the safety device operated, please turn the heater off and disconnect the appliance and
let it completely cool, inspect for blockage of air inlet or outlet. Wait at least 5 minutes to let
the protection system reset before restarting the heater. If the heater fails to operate or the
safety device switches the heater off again, return heater to your nearest service center
for examination or repair.

Maintenance and Storing:

1. Always be sure that the appliance is switched OFF before cleaning or attempting to
store the item. Do not immerse heater in water or allow water to drip into the interior of the
heater, as this could create an electric shock hazard.
2. Allow the product to completely cool before handling or cleaning it.
Ensure the heat select knob is in the shut down position and the power cord is unplugged
from the electrical outlet before cleaning the product.