Bluetooth Connection; Answering Incoming Calls - DCU Tecnologic 34152500 Manual De Usuario

ENG
BLUETOOTH HEADPHONE TURN ON/OFF:
1. Turn on: hold down the MFB for 2 seconds, the LED
turns solid blue for 2 seconds.
2. Turn off: hold down the MFB for 2 seconds, the LED
goes out

BLUETOOTH CONNECTION:

Follow the steps (please make sure that your phone is
built-in Bluetooth function)
1. Hold down the MFB button for 2 seconds, the LED
indicator turns blue for 2 seconds with a voice prompt
and then the indicator flashes alternately with blue
and red, the headphone enters the pairing status.
(Note: the headphone can automatically enter pairing
status after power on if there is no reconnections. As
the headphone can automatically reconnect with the
last device that you had paired. To re-connect, you just
need to turn it on).
2. Activate the Bluetooth function and search for
"DCU_Headphone" to connect. If the LED turns blue,
the connection is successful.

ANSWERING INCOMING CALLS:

Press the MFB button once to answer incoming calls.
Tip: some mobile phones default to answer calls via their
own receiver, please refer to the instructions of your phone
and set on your phone.
14