TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB
CHAPTER 22
ATTENTION: It is necessary to check that the IP address to be applied is not
occupied.
31. Set network mask.
32. Set gateway.
33. Set DNS. In case DNS is not set correctly, you must configure the SNTP server with your
IP and not with your domain.
When modifying any parameter, the button is enabled to send the new information to the display.
The process of loading the new configuration takes approximately 15 seconds. In case of
changing only the IP address, the process takes approximately 5 seconds, and an automatic
redirection is performed.
Particularities of WIFI communication
WIFI communication is not identical in functionality to ETHERNET. Here are the points to
consider:
•
ETHERNET settings cannot be changed via WIFI or vice versa.
•
Except: In case of forgetting the WIFI password, it must be reconfigured via wired
ETHERNET, regardless of the WIFI configuration mode.
•
When making a direct WIFI connection to the display, if a Windows operating system is
used, it may take a long time to update the connection status as connected. One way to
speed up the process is to close and immediately reopen the option to show "available
Wi-Fi networks".
•
For optimal performance, it is not recommended to send data to a viewer over WIFI while
setting.
•
ETHERNET and WIFI IP addresses are independents.
INITIALIZATION
Fig. 99: IP changing windows.
22-9