Publicidad
Idiomas disponibles
Idiomas disponibles
English
Bluetooth Operation
1. Press the Mode button until the Bluetooth mode has been selected, you will
hear an activation sound from the unit.
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3503A" and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
5. To forward skip, press the Forward Skip Button in and release.
6. To backward skip, press the Backward Skip Button in and release.
7. To pause the playback, short press the Pause button.
Note:
•
Bluetooth version – 5.0
Radio Operation
1. Press the Mode button until the Tuner mode has been selected.
2. To set auto scan station press and hold the Play/Pause button to activate
automatic programming. All available stations are programmed in the order of
waveband reception strength.
3. Short press the Forward and Backward Skip Button to change the preset
radio station.
4. Long press the Forward and Backward Skip Button to manually tune the radio
to the other frequencies.
Note: While manually tuning the radio, if you miss your radio frequency you can short
press the Forward or Backward Skip button to fine tune the radio frequency by 0.1MHz.
The fine-tuning feature will only last for two seconds after either A.) a long press while
manually tuning or B.) a short press while in fine tuning.
CD Playback Operation
1. Press the Mode button to select the CD function.
2. Press the Open/Close button to open the CD tray and put the CD in the tray
with the labeled side facing up.
3. Press the Open/Close button again to close the tray. The LED display will
show "Load" for a few seconds, then starts playing tracks.
4. During the playback, press the Play/Pause button to pause the CD. Press it
again to resume playback.
5. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
6
Publicidad
