Publicidad
Idiomas disponibles
Idiomas disponibles
5) Push the light button and the two lights will come on. Push it again and the light will turn off.
TROUBLESHOOTING
Fault
Light on, but motor
does not work
Light does not work,
motor does not work
Oil leakage
Lights not working
Insufficient suction
The
Cooker
hood
inclines
NOTE: Any electrical repairs to this appliance must conform to your local, state and federal
laws. Please contact the service center if in any doubt before undertaking any of the above.
Always disconnect the unit from the power source when opening the unit.
MAINTENANCE AND CLEANING
:
Caution
•
Before maintenance or cleaning is carried out, the cooker hood should be
disconnected from the main power supply. Ensure that the cooker hood is
switched off at the wall socket and the plug removed.
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or disconnected
One way valve and the outlet are not
tightly sealed
Leakage from the connection of
chimney and cover
Broken/Faulty globes
The distance between the cooker
hood and the gas top is too far
The fixing screw not tight enough
Select a fan switch position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit cord to power outlet.
Switch power outlet on.
Take down the one way valve and
seal with sealant.
Take chimney down and seal.
Replace globes as per this
instruction.
Refit the cooker hood to the correct
distance.
Tighten the hanging screw and
make it horizontal.
-33-
Solution
Publicidad
