Uline H-9764 Manual De Instrucciones página 3

6. If not attaching headrest, insert headrest cap into
opening on top of back support. (See Figure 6)
Figure 6
4
1
3
PAGE 3 OF 9
ASSEMBLY CONTINUED
TO ATTACH HEADREST (H-9765):
1.
CHAIR ADJUSTMENTS
1. Seat Height Adjustment – To raise seat height, lift
2. Adjustable Tilt Lock – To lock seat/back angle, press
3. Seat Depth (Seat Slider) – To adjust seat depth, lift the
4. Armrest Height Adjustment – To adjust armrest height,
2
Self-Weight Tilt Tension – Tilt tension automatically adjusts
based on user's weight.
1-800-295-5510
uline.com
With headrest cap removed, align holes of headrest
with holes on top of back support. Attach using two
M6 x 16 mm screws. (See Figure 7)
Figure 7
back side of lever up with little to no weight on the
seat. To lower seat height, lift lever up while sitting.
lever down at desired angle. Chair has synchro tilt;
the back tilts at a two-to-one ratio to the seat angle.
front side of lever and slide the seat forward or back
while sitting.
press the button on side of each armrest and move
the armrest up or down.
0522 IH-9764