Introduction; Package Contents; The All-In-One Device; Contactless Configuration - Veratron VL FLEX 52MM Serie Manual De Instrucciones

INTRODUCTION

PACKAGE CONTENTS

Item number
B00043501
A2C5205947101
A2C9582260001
B000100

THE ALL-IN-ONE DEVICE

The VL Flex 52 can be easily configured as the display device you need thanks to its 1.44" TFT display,
readable even in strong sunlight, embedded in a standard 52 mm diameter housing.
Supported analog inputs allow direct reading from motor sensors, and the NMEA 2000® interface extends
this function by allowing the VL Flex to read from the digital network.
The simple but effective display layout can be set up in a single or dual layout, presenting the data in a clear
and intuitive way, while the colored bar graph and alarm display allow you to interpret the data more quickly.

CONTACTLESS CONFIGURATION

Thanks to contactless configuration, you can configure your all-in-one instrument with a simple "tap"!
Start the smartphone app and define your settings via the user-friendly interface. Then simply hold your
smartphone on the front lens of the VL Flex to transfer the configuration immediately.
Thanks to the built-in passive antenna, the configuration can be done without power supply!
Description
1x VL Flex 52
1x 52 mm spinlock nut
1x wiring harness
1x safety instructions
INTRODUCTION
B000882