KRHÜNER 43138 Manual De Instrucciones página 6

ො Never expose the appliance to atmospheric conditions (rain, sun, etc.).
ො The appliance must be always placed on a flat and stable surface.
ො Do not put the cable over the appliance when it is still warm.
ො Do not use the radiator near bath-tubs, showers, wash-basins or swimming pools (min-
imum distance: 1 meter).
ො A correct operation of the appliance is obtained when the radiator is installed vertically.
Do not switch on the fan heater near pieces of furniture, curtains, shelves, etc.
ො Do not use the appliance near liquids or flammable matters.
ො Never operate the appliance immediately below an outlet.
ො Do not cover the appliance when it is running to avoid over heating risks.
SAFETY DEVICE
This appliance is provided witht wo safety devices: the first device disconnects the ap-
pliance when the radiator is tilted or when is tipped by means of a switch situated in the
lower part of the radiator. The second safety device disconnects the appliance in case of
overheating by means of a thermofuse.
Warning: This heater is not equipped with a device to control the room temperature.
Do not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constatn supervision is provided.
NOTE: It is normal when the heaters are turned on for the first time or when they are
turned on after having not been used for a long period of time the heaters may emit
some smell and fumes. This will disappear when the heater has been on a short while.
2. HOW TO USE
ASSEMBLY
Assemble the body frame and the base plate together as the following sequences:
1. Remove the butterfly nuts from the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the basement and
then assemble the body frame to the base plate.
3. Secure the body frame to the base plate by means of the two butterfly nuts previously
removed.
4. Insert the power cord through the suitable slots and then fix it by the clamp.