Troubleshooting - Klarstein MELVILLE 3 Manual De Instrucciones

EN
64

TROUBLESHOOTING

Reviewing the charts on the following pages may save you from calling for service.
Problem Possible Causes
Fuse blown, or the circuit
break tripped.
Power supply is not
Dishwasher does
turned on.
not start
Error code:E1;
Water pressure is low
Door of dishwasher
not properly closed.
Twisted or trapped drain
hose.
Filter clogged.
Water not pumped
form dishwasher
Kitchen sink clogged.
What To Do
Replace fuse or reset circuit
breaker.
Remove any other appliances
sharing the same circuit with
the dishwasher.
Make sure the dishwasher
is turned on and the door is
closed securely.
Make sure the power cord is.
properly plugged into the
wall socket
Check that the water supply is
connected properly andthe
water
is turned on.
Make sure to close the door
properly and latch it.
Check the drain hose.
Check coarse the filter.
Check the kitchen sink to
make sure
it is draining well.If the
problem is
the kitchen sink that is not
draining,
you may need a plumber
rather than
a serviceman for
dishwashers.