Honeywell Home THM5421R1021 Guia De Instalacion página 4

NOTE: If the "Connected" light does NOT flash green, another system may be
in the listening mode. Please exit the listening mode at the other system and
then try again.
• Green Flashing: In Listening Mode - system is ready to add RedLINK
devices.
• Green Steady: RedLINK devices are communicating.
• Red: RedLINK device(s) are NOT communicating. Check EIM and
RedLINK devices.
4.2b While the "Connected" light is flashing green on the EIM, press
NEXT on the thermostat. After a short delay, the screen will show the
thermostat is connected.
4.3 When you see the prompt Do you have RedLINK accessories to
connect? Touch YES or NO. *
• If you select YES, you will be prompted to Press Connect on all new
accessories. Continue to Step 4.4.
• If you select NO, continue to Step 4.5.
4.4 Connect each RedLINK accessory.
NOTE: Make sure accessories are at least 2 feet away from the EIM during
the linking process.
4.4a While the Add Device screen is displayed (listening mode), press
and quickly release the CONNECT button on each new RedLINK
accessory.
NOTE: The Prestige or RedLINK VisionPRO display will instruct you to press
connect on the accessory while in listening mode.
* RedLINK FocusPRO display will say "wireless setup" in display when it is ready to
connect to the EIM and accessories during the initial setup.
Next
4
M34248A