Maintenance & Cleaning - san ignacio 43214 Manual De Instrucciones

2. HOW TO USE
PARTS
A. Top cover
D. Cup for collecting juice E. Base
• Place the body on the base unit.
• Place the cup for collecting the juice in the
shaft of the base unit.
• Place the filter in the cup.
• Place the juicer in the drive shaft of the base
unit.
• Insert the plug into a suitable outlet.
• Cut the fruit in half and press one half slight-
ly down on the cone section cut down.
• The cone will start rotating automatically
when pressure is applied to the device. The
juicer turns off when the pressure rises.
• When processing large amounts of fruit pulp
strainer must be emptied from time to time,
as needed.
• Make sure the plug is removed from the socket after use.
3. MAINTENANCE & CLEANING
CLEANING
• Before cleaning the appliance, remove the plug from the outlet.
• To avoid the risk of electric shock, do not clean the base unit or the power cord with
water, and do not immerse them in water.
• Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning.
• The base unit can be cleaned with a slightly damp, lint free cloth.
• The accessories should be thoroughly cleaned with hot water and a mild detergent.
The filter can also be cleaned in a dishwasher.
B.Juicer C.Filter