FIRST STEPS
Before first use, allow the lamp to charge for up to 3 hours to obtain a full charge last-
ing between 3 and 6 hours, depending on the selected mode.
1. Charge the sphere with the USB cable. During the charging process, a red light will
turn on. When it finishes charging, the red light will turn off.
2. Mount the sphere support (4).
3. Place the sphere on the top of the support.
4. Turn on the lamp.
Turn on the lamp by touching the metal switch, tapping anywhere on the moon or
pressing the ON button on the remote control.
Short touch: change the colour / Long touch: change the brightness
Note: the lamp will turn off when the metal part of the surface is held for 5-6 seconds
and can only be turned back on by pressing the metal part for another 5-6 seconds.
The lamp will not turn on again using the remote control.
COLOURS
The light will turn on the first time into a bright red-orange colour.
There are 16 colours on the remote control you can set depending on the desired
mood:
A. Red, orange-red, orange, tan, yellow
B. Green, light green, sky-blue, aquamarine, blue
C. Purple, light purple, violet, fuchsia, pink
D. White