Publicidad
ENGLISH
•
Do not allow any part of the appliance touch the face, neck or scalp.
•
Keep the power plug and cord away from heated surfaces.
•
Do not use attachments other than those we supply.
•
Do not use the appliance if it is damaged or malfunctions.
•
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly
for any sign damage.
•
This appliance is not intended for commercial or salon use.
PARTS
1. 1000W power handle
2. Air speed LED indicators
3. StyleAdapt™ indicator
4. Oval mixed bristle brush
5. 50mm mixed bristle brush
6. Root boost attachment
7. Inlet grille
8. Hang up loop
INSTRUCTIONS FOR USE
To fit/remove attachments
Fit the attachment before you turn on the appliance.
CAUTION: Attachments can become hot during use, let them cool before removing.
1.
To fit an attachment, slide it into place onto the power handle until it clicks.
2.
To remove, slide the accessory release button (5) backwards and remove the
accessory.
Prepare the hair for styling
•
Wash and condition the hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Using the pre-styling nozzle rough dry the length and roots until 80% dry.
•
Divide the hair into sections, style the lower layers first.
1.
Plug your air styler into the mains power supply.
2.
Press the C button to switch on.
StyleAdapt™ Mode
•
StyleAdapt™ mode can only be selected if either of the two brushes are fitted. It is
disabled if the root boost attachment is fitted.
1.
When first switched on your air styler will be in StyleAdapt™ mode.
2.
Select the desired air speed using the speed selector (F) button. The air speed LED
indicators will show the selected air speed:
4
9. Swivel cord
Controls:
C On/off button
F Speed selector button
K StyleAdapt™ button
5 Accessory release button
f Cool shot button
Publicidad
